HyberNite Universal Heated CPAP Hose

It is compatible with all CPAP and BiPAP machines (which use water based humidifiers and standard tubing).

If you are experiencing the following discomforting issues as a result of your humidifier (pressure fluctuations, waking up with a wet face and nose, or hearing a gurgling noise from the mask/CPAP device), the Hybernite Rainout Control System is your solution.

The HyberNite CPAP heated tube helps avoid condensation and rainout, by controlling the temperature inside the hose instead of adapting the temperature in your bedroom. The Hybernite CPAP Heated Hose can be used with any CPAP or BiPAP system which utilises the standard 22mm connection. The copper wires embedded in the walls of the tubing uses its own power supply to heat the tube and prevents condensation by maintaining the tubing temperature. Warmer and more humid pressurized air makes CPAP therapy more comfortable, however the trade-off for this comfort typically is condensation in the tubing.

• Power supply unit and Australian Power Cord
• Heated CPAP Tube HyberNite Hose Tubing 6feet
• PowerPal ON/OFF switch - For your convenience, you can use a PowerPal which adds a power switch at the tube end. This is useful for those who will have their Hybernite plugged into a wall socket that is difficult to access.

• Reduces CPAP rainout (condensation built up in the tube & mask)
• Self-Powered- Standalone heated CPAP tube is powered with its own power supply unit
• Universal Fit- Connects with all CPAP/BiPAP systems using standard breathing tube, even those with no heating capabilities.
• Heated Breathing Tube - Hybernite has copper wires embedded in the tubing that generate heat energy maintaining the air temperature inside the tube.
• Reduces sleep discomfort and disruptions
• low flow resistance & high crush resistance  
• Constantly control temperature settings on the humidifier won't be required.
• Ultra-Flexible

The Hybernite uses its own mains power supply, and can be turned on or off at the socket. For convenience, you can you a PowerPal which adds a power switch at the tube end. This is useful for those who will have their Hybernite plugged into a wall socket that is difficult to access.

USAGE TIPS:

Power Supply - The manufacturer recommends that the Hybernite Power Supply Unit be placed on the floor during operation. If the power supply is disconnected or not available for use Hybernite tubing will function as standard CPAP tubing without power.
Humidification Required - The Hybernite Rainout Control System is only compatible with CPAP/BiPAP machines equipped with water based humidifiers. If your system is not equipped with a humidifier then the Hybernite system cannot be used.
Hose Wraps & Covers - The manufacturer recommends that Hybernite Heated Tubing NOT be wrapped or covered with a Snuggle hose or any similar product due to the possibility of elevated temperatures.